Fyne Audio F502S Speaker
Fyne Audio home theatre speakers – your best option in the F500S Series range. Equipped with an impressive 8” IsoFlare driver and additional bass driver, the speaker offers rich bass and clear high frequency sounds. They are recommended for both hi-fi and home theater use in spacious rooms.
Technical Specifications:
- System Type: 2.5-way speaker with auxiliary bass radiator (ABR)
- Recommended Amplifier Power: 30–150 W RMS
- Frequency Response: 56 Hz – 34 kHz
- Sensitivity: 90 dB
- Nominal Impedance: 8 Ohms
₹359,900
Product Details
The Fyne Audio F502S LCR is a highly adaptable 2.5-way speaker, specifically for high-end home theatre systems. Fyne Audio home theatre speakers is meant for installation in the left, center, or right channels and has a 150 mm IsoFlare speaker cone with a 25 mm magnesium dome compression tweeter, another 150 mm woofer, and 150 mm ABR bass auxiliary speaker.
A wall-mountable option gives the speaker more flexibility, but what makes this product special is the ABR system that does not use any conventional speaker ports, so the speaker works perfectly fine even if we install very close to the walls.
Having a sensitivity of 90 dB and 8 ohms impedance, the F502S LCR ensures precise dialogue reproduction and a perfect soundstage for both music and films.
Product Specifications:
| System Type | 2 ½ way, downwards firing port, with BassTraxTMTractrix diffuser. |
| Recommended amplifier power (Watt RMS) | 30 – 180 |
| Continuous power handling (Watt RMS) | 90 |
| Sensitivity (2.83 Volt @ 1m) | 91dB |
| Nominal impedance | 8 Ohm |
| Frequency response (-6dB typical in room) | 30Hz – 34kHz |
| Drive unit complement | 1 x 200mm IsoFlareTM, bass / mid with 25mm magnesium dome compression tweeter. 1 x 200mm bass. |
| Crossover frequency | 250Hz & 1.7kHz |
| Crossover type | 2nd order low pass, 1st order high pass |
| System adjustments | Presence control +/- 3dB (2.5 – 5.0kHz) |
| Dimensions - HxWxD | 1112 x 300 x 382mm (43.8 x 11.8 x 15.0") |
| Net Weight - Each | 28.5kg (62.8lbs) |
| Finishes | Black Oak, Natural Walnut, Piano Gloss Black |
| Cabinet Construction | High-rigidity MDF with extensive internal bracing |
| S-Trax Position (from cabinet front edge) | 61mm (2.4") |
| SuperTrax Position (from cabinet front edge) | 37mm (1.5") |
Additional information
| Condition | New |
|---|---|
| Finish | Black Oak, Walnut |
