Fyne Audio F500SP Bookshelf Speaker
The Fyne Audio F500SP Speaker is a special production stand-up loudspeaker that is made in the UK and uses a 6″ SP IsoFlare point-source driver, magnesium dome tweeter, and BassTrax Tractrix diffuser to produce smooth bass. It is the most cost-effective luxury speaker produced by Fyne Audio.
-
Product Specifications:
| System Type | 2 way, downwards firing port, with BassTraxTM Tractrix diffuser* |
| Recommended amplifier power (Watt RMS) | 30 – 120 |
| Continuous power handling (Watt RMS) | 60 |
| Sensitivity (2.83 Volt @ 1m) | 90dB |
| Nominal impedance | 8 Ohm |
| Frequency response (-6dB typical in room) | 42Hz – 34kHz |
| Drive unit complement | 1 x 150mm IsoFlare™ point source driver Multi-fibre bass / midrange cone, FyneFlute™ surround with 25mm magnesium dome compression tweeter, neodymium magnet system |
| Crossover frequency | 1.7kHz |
| Crossover type | Bi-wired passive low loss, 2nd order low pass, 1st order high pass. Cryo-Lite treated. |
| Dimensions – HxWxD | 323 x 200 x 320mm (12.7 x 7.9 x 12.6”) |
| Net Weight – Each | 8.1kg (17.6lbs) |
| Finishes | Piano Gloss Black |
| S-Trax Position (from cabinet front edge) | 44mm (1.7″) |
| SuperTrax Position (from cabinet front edge) | 20mm (0.8″) |
₹339,900
Product Details
An updated edition of the highly praised F500 series, the Fyne Audio F500SP Speaker is able with a special IsoFlare driver, specially tuned crossover network and advanced BassTrax port technology borrowed from the highly successful F500 SP series speaker.
Fyne Audio F500SP bookshelf speaker in Piano Gloss Walnut finish
In addition to having superb bass reproduction due to its special twin magnet motor system and FyneFlute roll surround to minimize cone qualities at the driver terminations, the low frequency sound generated by the driver is fed through a downfiring port into Fyne's superior BassTrax Tractrix diffuser system for a balanced bass sound and effortless blending into the room acoustics.
Featuring an additional fifth terminal for grounding the speaker's chassis, the bi-wire connection panel eliminates any possible RF interference from the amplifier or cables. In addition to the standard, updated F500SP has an elegant walnut wood veneer option and diamond cut aluminum trim.
- Driver Complement: 150mm SP IsoFlare point-source driver
- Frequency Response: 42Hz – 34kHz (-6dB, typical in-room)
- Sensitivity: 90dB (2.83V @ 1m), 8 Ohm nominal impedance
- Recommended Amplifier Power: 30W–120W RMS (60W continuous handling)
- Dimensions: 323 x 200 x 320mm | Weight: 8.1kg each
Additional information
| Condition | New |
|---|---|
| Finish | Walnut |
